|
Product Model
|
[ ESR-212 ]
|
[+] Enlarge image |
ISO View | Top View | Open View
Front View | Rear View |
Summary
The ESR Series Storage server balances what the End-User and System vendor need to deliver the best solution,
provide a classy design, highest flexibility, easy to install and maintain, more storage in a limited space and
ultimate drive and data protection. The ESR-212 has up to six hot-swappable cooling fans and with multiple temperature sensors at the hot points. This product has been tested and approved by Intel to support
Clovertown/Penryn. The ESR-212 redundant, load-sharing power supply modules and power
management circuitry accommodate the dynamic requirements of today’s drives. The ESR-212 further includes power
supply-to-drive isolation, which allows control over voltage and cuent fluctuations
Features and Benefits
- Supports SSI EEB 3.5, CEB 1.1 or AMD Dual Opteron compliant server boards
- Power MOSFET and pre-charge circuit for surge current protection on hard drive and backplane
- Horizontal backplane design to allow maximum airflow for system cooling
- Included SGS approved slide rails
- 3 years warranty on power supply
- Other High Quality Components are backed by a lifetime warranty
|
|
| Specification |
| Dimensions |
3.5"(H) x 19"(W) x 28"(D) |
| Front Access Connector |
|
| Front Access switch |
Power On/Off, Reset, Alarm Reset |
| Front Panel Indicators |
Power On, HDD Activity, PSU failure, Fan failure, Overheat warning, LANs |
| Hot swap drive indicators |
Power On, HDD Activity, HDD failure |
| Power Supply |
500W 1+1 Hot-swap redundant power supply |
| Power Supply Options |
460W Fixed, 600W Fixed, |
| System Board |
Up to 12x13 E-ATX, ATX, EEB 3.5, CEB 1.1 compliant |
| Drive Bay |
Internal slim 2.5" x 1 ( 4 maximum ) |
Hotswap Bay x 12 |
|
| Data Backplane |
| Serial ATA PTP |
| Serial ATA Multilane |
| Ultra 320 SCA |
| Serial Attached SCSI |
|
| Included Data cable |
Yes
|
| Included slide rail |
Yes
|
| System Monitoring |
Fan / over heat / power supply fault detection |
| Thermal |
Intel Validated Pass Xeon 3.73Ghz 1066Mhz |
| SATA backplane Specification |
1. A power MOSFET to provide disk spin-up control
2. A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
3. LED: Blue ON = HDD present; Blue Blinking = Drive activity; Red=Drive failure
4. A 4x2 header for Drive activity and Drive failure LED signal input
5. Single DC input to provide better cable management
6. Option for SATA PTP. SAS, multilane and miniSAS
7. Option support SAS expander |
| SCSI backplane Specification |
1. A power MOSFET to provide disk spin-up control
2. A pre-charge circuit for surge current protection when a disk is plugged in to protect the hard-disk drive and the backplane.
3. LED: Blue ON = HDD present; Blue Blinking = Drive activity; Red=Drive failure
4. A 4x2 header for Drive activity and Drive failure LED signal input
5. Single DC input to provide better cable management
6. Piano Switch for easy SCSI ID setting
7. Two HD68 SCSI connectors for daisy chain if required |
|
|
All package are for US and Canada only , visit support page for other counties.
|
|
|
TERMS | PRIVACY | SITE MAP
© Copyright 2005, TST Corp. All rights reserved
|
|
|
